Weldotherm - Measuring Devices: Program Controller

Program Controller

WELDOTHERM® program controller type: DIGIT
The digital process controller DIGIT is a customised universal program controller and is designed for controlling of annealing and cooling devices. The unit is equipped with a sensor which is responsible for the temperature registration and- controlling of the control circuits. The program controller is equipped with 2 independent interfaces and can store up to 40 programs. Using the visualisation software WinControl it enables you to control the DIGIT at the PC. The DIGIT series (450, 500, 600) mainly differ from the number of sensors. The DIGIT 500 or 600 are free configurable.
Technical Data

Program input:	more than 15 keys

Number of programs:	40

Number of steps per program:	7 + automatic stating time

Mains voltage:	of DIGIT 450 and DIGIT 600: 80 V … 264 V AC or 110 V … 264 V AC DIGIT 500: 230 V, 50/60 Hz +/- 10% option: 115 V, 50/60 Hz +/- 10%

Weight:	1.3 … 1.65 kg

Dimensions:	W 96 x H 96 x D 220 mm

Installation depth:	220 mm including plug, 250 mm including SUB D9 plug

WELDOTHERM® program controller type: TC 60
Using our controller TC 60 you are able to choose an exact heat treatment program. You can save up to 5 programs of your choice. Because the program controller is equipped with a non-volatile memory, the saved programs remain available even after separation from mains voltage.
Technical Data

Program input:	by 5 control keys

Number of programs:	5, program linkage 1-5 possible

Number of steps per program:	4 + automatic stating time

Mains voltage:	230 V, 50/60 Hz +/- 10%

Weight:	700 g

Dimensions:	W 65 x H 110 x D 60 mm